Symmetricom TimeProvider 1100 - Retrieve Circuit Identification (RTRV-CKTID)

Chapter 2 TL1 Command Syntax and Description
Retrieve Circuit Identification (RTRV-CKTID)
84 TimeProvider TL1 Reference Guide 097-58001-01 Revision E – September 2006
Retrieve Circuit Identification (RTRV-CKTID)
This command retrieves the circuit identification assigned to the designated aid.
This command has a default access level of USER.
Syntax
RTRV-CKTID:[<tid>]:<aid>:[<ctag>];
Command Output
The following shows the output format of the command.
Response Format
<cr><lf><lf>
sid date time<cr><lf>
M ctag COMPLD<cr><lf>
"GPS:<cktid>"<cr><lf>
"PRS:<cktid>"<cr><lf>
"INP1:<cktid>"<cr><lf>
"INP2:<cktid>"<cr><lf>
"OUTA-1:<cktid>"<cr><lf>
"OUTA-2:<cktid>"<cr><lf>
.
.
"OUTD-15:<cktid>"<cr><lf>
"OUTD-16:<cktid>"<cr><lf>
"RTMA-1:<cktid>"<cr><lf>
"RTMA-2:<cktid>"<cr><lf>
.
.
"RTMD-1:<cktid>"<cr><lf>
"RTMD-2:<cktid>"<cr><lf>
"E422A-1:<cktid>"<cr><lf>
"E422A-2:<cktid>"<cr><lf>
.
.
"E422D-7:<cktid>"<cr><lf>
"E422D-8:<cktid>"<cr><lf>
;
Parameter Value Description
<aid> GPS
PRS
INPp
OUTg[-p]
RTMg[-p]
E422g[-p]
Retrieves the circuit identification (cktid) for the designated
aid.