Chapter 2 TL1 Command Syntax and Description
Edit Password (ED-PID)
54 TimeProvider TL1 Reference Guide 097-58001-01 Revision E – September 2006
Edit Password (ED-PID)
This command allows users to edit their own password in the user database.
This command has a default access level of USER.
Syntax
ED-PID:[<tid>]:<uid>:[<ctag>]::<oldpid>,<newpid>;
Example
To change user Fred’s password from "FRED.1" to "ETHEL!5":
Input
ED-PID::fred:TP1000::FRED.1,ETHEL!5;
Normal Response
TP-SSU
05-02-10 13:35:56
M TP1000 COMPLD
;
Autonomous Message
TP-SSU
05-02-10 13:35:56
A 2538 REPT EVT
"IMC,EQPT:PIDCHG,TC,05-02-10,13-35-56,,,,:\"USER PASSWORD HAS CHANGED\""
;
Parameter Value Description
<uid> text string The user name assigned to the user for which the password
is being changed. This must be the <uid> of the user logged
into the current session.
<oldpid> text string The user’s currently existing password.
Note: This parameter must exactly match the existing
password in the user database, or a DENY response is
returned.
<newpid> text string The user’s new password.
Notes:
The password can be up to twenty (20) characters. It
must include at least two non-alphabetic characters,
and must include at least one special character, which is
any printing character other than a letter of the alphabet,
a number, a comma, a colon, or a semicolon.
To use case-sensitive passwords, <pid> must be
enclosed in quotes in the command line.
To Next Page
Loading...
Need help?
General
