Symmetricom TimeProvider 1100 Reference Guide

Chapter 2 TL1 Command Syntax and Description
Edit Date (ED-DAT)
44 TimeProvider TL1 Reference Guide 097-58001-01 Revision E – September 2006
Edit Date (ED-DAT)
This command changes the system date and time. If the date and time is set by
GPS, the date and time cannot be changed. The local time offset can always be
changed even after the time is changed by GPS.
This command has a default access level of ADMIN.
Syntax
ED-DAT:[<tid>]:[<aid>]:[<ctag>]::<keyword>=<value>;
Example
To change the system time to 1:56:00 PM:
Input
ED-DAT::SYS:TP1000::TIMCHG=13-35-56;
Normal Response
TP-SSU 05-02-10 13:35:56
M TP1000 COMPLD
;
Autonomous Message
TP-SSU 05-02-10 13:35:56
A 2535 REPT EVT
"SYS,EQPT:TIMCHG,TC,05-02-10,13-35-56,,,,:\"SYSTEM TIME HAS CHANGED,
13-35-56\""
;
Parameter Value Description
<aid> SYS The command’s effect is at the system level.
Note: See Table 2-4 for <keyword> and <value> descriptions.
Table 2-4. ED-DAT – Keywords and Values for <aid>=SYS
<keyword> <value> Description Default
DATCHG yy-mm-dd The year, month, and day set for the system:
yy = the 2-digit year, mm = the 2-digit representation of
the month, dd = the day of the month
N/A
TIMCHG hh-mm-ss The hours, minutes, and seconds set for the system:
hh = hour, in 24-hour format, mm = minutes, ss = seconds
N/A
LOCTIM
± hh-mm
The hours and minutes that local time is offset from UTC:
hh = the local time’s hour offset from UTC;
±12 hours,
mm = the local time’s minute offset from UTC
N/A

Symmetricom TimeProvider 1100 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1100
Category	Clock
Language	English