097-58001-01 Revision E – September 2006 TimeProvider TL1 Reference Guide 85
Chapter 2 TL1 Command Syntax and Description
Retrieve Command Security (RTRV-CMD-SECU)
Retrieve Command Security (RTRV-CMD-SECU)
This command retrieves the access level set for a specified command, or all
commands.
This command has a default access level of ADMIN.
Syntax
RTRV-CMD-SECU:[<tid>]:<cid>:[<ctag>];
Command Output
The following shows the output format of the command, and Table 2-14 explains the
various fields in the command output:
Response Format
<cr><lf><lf>
sid date time<cr><lf>
M ctag COMPLD<cr><lf>
"command,access"<cr><lf>
"command,access"<cr><lf>
.
.
"command,access"<cr><lf>
;
Parameter Value Description
<cid> text string Retrieves the access level for the command with this identifier.
The command identifier is the part of the command syntax that
appears before the first colon ( : ). It is not case-sensitive.
ALL Retrieves the access level for all commands.
Table 2-14. RTRV-CMD-SECU Output Fields
Field Description
command The identifier of the command for which the access level is displayed. The command
identifier is the part of the command syntax that appears before the first colon ( : ).
access The access level for the specified command. The access level can be one of the
following:
NONE (command can be issued by all users)
USER (command can be issued by users with an access level of USER, ADMIN,
or SECURITY)
ADMIN (command can be issued by users with an access level of ADMIN or
SECURITY)
SECURITY (command can be issued by users with an access level of SECURITY)
To Next Page
Loading...
Need help?
General
