Symmetricom TimeProvider 1100 - Setting Communications Parameters

Chapter 2 TL1 Command Syntax and Description
Retrieve Command Security (RTRV-CMD-SECU)
86 TimeProvider TL1 Reference Guide 097-58001-01 Revision E – September 2006
Example
To display the current access level set for all TL1 commands:
Input
RTRV-CMD-SECU::ALL:TP1000;
Response Example
TP-SSU 05-02-10 13:37:39
M TP1000 COMPLD
"ACT-SWDL,ADMIN"
"ACT-USER,NONE"
"CANC-USER,NONE"
"CPY-MEM,ADMIN"
"DLT-SECU,SECURITY"
"DLT-USER-SECU,SECURITY"
"ED-CMD-SECU,ADMIN"
"ED-DAT,ADMIN"
"ED-EQPT,ADMIN"
"ED-PID,USER"
"ED-SYNC,ADMIN"
"ED-USER-SECU,SECURITY"
"ENT-PID,SECURITY"
"ENT-USER-SECU,SECURITY"
"INIT-LOG,ADMIN"
"INIT-SYS,ADMIN"
"OPR-ACO-ALL,USER"
"PING,USER"
"RTRV-ALM,USER"
"RTRV-ATTR,USER"
"RTRV-CMD-SECU,ADMIN"
"RTRV-COND,USER"
"RTRV-CRAFT,USER"
"RTRV-DAT,USER"
"RTRV-EQPT,USER"
"RTRV-HDR,NONE"
"RTRV-INV,USER"
"RTRV-LED,USER"
"RTRV-LOG,ADMIN"
"RTRV-MANF-INFO,SECURITY"
"RTRV-NETYPE,NONE"
"RTRV-SYNC,USER"
"RTRV-SYS-MODE,USER"
"RTRV-USER,USER"
"RTRV-USER-SECU,SECURITY"
"SET-ATTR,ADMIN"
"SET-SID,ADMIN"
"SET-SYS-MODE,ADMIN"
;
Autonomous Message
None