097-58001-01 Revision E – September 2006 TimeProvider TL1 Reference Guide 35
Chapter 2 TL1 Command Syntax and Description
Cancel User (CANC-USER)
Cancel User (CANC-USER)
This command terminates the specified user’s session, and logs the user out of the
system.
This command has a default access level of USER. This command’s access level
cannot be changed.
Syntax
CANC-USER:[<tid>]:[<uid>]:[<ctag>];
Example
To terminate the current session for user "FRED":
Input
CANC-USER::FRED:TP1000;
Normal Response
TP-SSU
05-02-10 13:35:56
M TP1000 COMPLD
;
Autonomous Message
TP-SSU 05-02-10 13:35:56
A 2529 REPT EVT
"IMC,EQPT:LOGOUT,TC,05-02-10,13-35-56,,,,:\"USER LOGGED OUT, FRED\""
;
Parameter Value Description
<uid> text string The user name assigned to the user whose session is
being terminated.
Note: Users at the Admin or Security level can terminate
the active sessions of other users. In such cases, this
parameter must be specified. Including the <uid> in the
command line is not necessary for users to log themselves
out of their own user session.
(null) The owner’s current user session is terminated.
To Next Page
Loading...
Need help?
General
