Chapter 2 TL1 Command Syntax and Description
Delete User Security (DLT-USER-SECU)
40 TimeProvider TL1 Reference Guide 097-58001-01 Revision E – September 2006
Delete User Security (DLT-USER-SECU)
This command allows a security-level user to delete any user in the user list.
This command has a default access level of SECURITY.
Syntax
DLT-USER-SECU:[<tid>]:<uid>:[<ctag>];
Example
To delete user "FRED" from the system:
Input
DLT-USER-SECU::FRED:TP1000;
Normal Response
TP-SSU
05-02-10 13:35:56
M TP1000 COMPLD
;
Autonomous Message
TP-SSU 05-02-10 13:35:56
A 2533 REPT EVT
"IMC,EQPT:USRDEL,TC,05-02-10,13-35-56,,,,:\"USER HAS BEEN DELETED\""
;
Note: The system does not allow the last security-level user to be
deleted if other users are defined in the system.
Parameter Value Description
<uid> text string The user name assigned to the user being deleted.
To Next Page
Loading...
