Appendix C Events
160 TimeProvider TL1 Reference Guide 097-58001-01 Revision E – September 2006
XFEROK The transfer of IMC Istate
to the IOC was
successful. The transfer
of IOC Istate to the IMC
was successful. The
transfer of IOC Istate to
the redundant IOC was
successful.
EQPT NA NA
GPS Event Codes
CKTIDCHG A user has modified the
Circuit ID for the GPS
input.
T1 GPS The ID can be up to 40 characters
in length.
MODE User set/request for
system position when
using GPS or when
position is automatically
found
EQPT AUTO AUTO | MANUAL
POS User set/request for GPS
Antenna Latitude,
Longitude, Height
EQPT dd-mm-ss.ss(N
or S)
dd-mm-ss.ss(E
or W)
+/-hhhh.h
dd-mm-ss.ss(N|S).
dd-mm-ss.ss(E|W),+/-hhhh.hh
ELEVMASK User set/request for GPS
Elevation Mask
EQPT dd 5 to 45 (default is 10) degrees
RESET GPS power has been
reset.
EQPT NA NA
IOC Event Codes
CCALIGN Allows the user to clear
the INPTRR alarm or
clear INPTRR and force
alignment between the
CC output and a CC
input.
T1 NA NA
CLKTYPE The specified IOC sets
the clock type to the
specified value. The
value is used to define
module pull in range and
SSM generation during
Holdover.
EQPT TYPEI ST3E | TYPEI | ST2 |TYPEII
Table C-1. Event Identifiers (Continued)
Event ID
or
CONDTYPE
Event Description
AID
TYPE
Default Value Value Description
To Next Page
Loading...
Need help?
General
