Symmetricom TimeProvider 1100 Reference Guide

Appendix C Events
162 TimeProvider TL1 Reference Guide 097-58001-01 Revision E – September 2006
IOC Clock Event Codes
CLKFSTLK The local oscillator on the
specified IOC is in
Fast-Lock mode
EQPT NA NA
CLKLOCK The local oscillator on the
specified IOC is in Lock
mode
EQPT NA NA
SCAVAIL The specified IOC
module was tracking a
reference for at least 32
Hours, allowing the
SmartClock algorithm to
be engaged.
EQPT OFF
 ON – SmartClock is available.
 OFF – SmartClock is not
available
Input Event Codes
CKTIDCHG A user has modified the
Circuit ID for the input.
T1 GPS The ID can be up to 40 characters
in length.
CRCENA Allows the user to
provision the E1 (CAS/
CCS) inputs to enable or
disable the use of CRC4
checking. If the E1 input
is provisioned to read
SSMs, CRC4 is
automatically enabled.
T1 DISABLE ENABLE | DISABLE
FRMTYPE Allows the user to
provision the type of input
framing or the input
frequency.
Allows the user to
provision the output
framing type.
T1 PRC INPUT =
2M
INPUT 1 = 2M
INPUT 2 = 2M
1.544M – 1.544 MHz
2M – 2.048 MHz
5M – 5 MHz
6.312M – 6.312 MHz
10M – 10 MHz
CAS – CAS Input
CCS – CCS Input
D4 – Super Frame Input
ESF – Extended Super Frame
Input
CC – Composite Clock Input
JCC – G.703 64K/8K
JCC4 – G.703 64K/8K/0.4K
Table C-1. Event Identifiers (Continued)
Event ID
or
CONDTYPE
Event Description
AID
TYPE
Default Value Value Description

Symmetricom TimeProvider 1100 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1100
Category	Clock
Language	English