Symmetricom TimeProvider 1100 - Page 68

Chapter 2 TL1 Command Syntax and Description
Initialize System (INIT-SYS)
68 TimeProvider TL1 Reference Guide 097-58001-01 Revision E – September 2006
Example
To perform a reset on the IOC2 module:
Input
INIT-SYS::IOC2:TP1000::RESET;
Normal Response
TP-SSU 05-02-10 13:35:56
M TP1000 COMPLD
;
Autonomous Message
TP-SSU 05-02-10 13:35:56
A 258 REPT EVT
"IOC2,EQPT:RESET,TC,05-02-10,13-35-56,,,,:\"MODULE HAS BEEN RESET\""
;