Symmetricom TimeProvider 1100 Reference Guide

Chapter 2 TL1 Command Syntax and Description
Retrieve Craft Data (RTRV-CRAFT)
96 TimeProvider TL1 Reference Guide 097-58001-01 Revision E – September 2006
priority The provisioned priority level for the PRS input.
1 | 2 | 3 | 4
frmtype The PRS input frequency setting.
2M | 5M | 10M
<aid> = INPp
inpstatus The current status of the specified input.
OK | ALM
instate The state of the specified input.
ENABLE | DISABLE | MONITOR
qlevel The provisioned quality level for the specified input.
1 | 2 | ... | 9
priority The provisioned priority level for the specified input.
1 | 2 | 3 | 4
frmtype The frame signal type provisioned for the specified input.
2M | CCS | D4 ESF | CC
rqlevel The quality level received on the specified input.
1 | 2 | ... | 10
crcena The specified input is provisioned to utilize CRC4 checking.
ENABLE | DISABLE
ssmena The specified input is provisioned to read the received SSM.
ENABLE | DISABLE
ssmbit The bit position at which the specified input is provisioned to read SSM.
4 | 5 | 6 | 7 | 8
<aid> = OUTg
outstatus The current status of the specified output group.
OK | ALM | UNEQUIPPED
outstate The state of the specified output group.
ENABLE | DISABLE
frmtype The framing type that the specified output group is provisioned to generate.
2M | CAS | D4 | ESF | CC | ISOLATED_1
freeflt The type of signal to be generated on the specified output group when the Local
Oscillator enters Free-run mode.
ON | SQUELCH AIS
holdflt The type of signal to be generated on the specified output group when the Local
Oscillator enters Holdover mode.
ON | SQUELCH AIS
Table 2-16. RTRV-CRAFT Output Fields (Continued)
Field Description

Symmetricom TimeProvider 1100 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1100
Category	Clock
Language	English