ALGORITHMS
M5ALGOIN
Rev 1.7 Page 21
FBLOCUT off - 800 Hz Feedback Low-Cut enables you to
remove low frequencies from the
feedback loop.
FBHICUT 1 KHz - off Feedback High-Cut enables you to
remove high frequencies from the
feedback loop.
HICUT 500 Hz - flat High-cut filter enables you to make the
chorus sound more "warm". This is a 6
dB per octave filter.
ATT -40 - 0.0 dB Gain for HICUT filter. Adjustable in 0.5
dB steps.
To Next Page
Loading...
