ALGORITHMS
M5ALGOIN
Rev 1.7 Page 31
PITCH-2 M5000
The PITCH-2 algorithm is an ultra-fast and high resolution harmony effect with an intelligent
working de-glitcher. The difference from the PITCH-1 algorithm is, that this is a stereo pitch-
transposer where the left and the right channels are linked together to ensure a 100% phase
linear output. The diagram below is an addition to the signal flow diagram found in the
"BASIC ALGORITHMS" module, page 2.
EDIT PARAMETERS:
PAGE 1:
MIX 0 - 100 % Sets the mix between dry and wet signal.
100 % = effect signal only. Mix can be
set to 100 % globally in the G-LEVELS-
menu under UTILITY. Set MIXMODE
WET=MAX
and all dry signals are
"killed" regardless of preset mix settings.
To Next Page
Loading...
