ALGORITHMS
M5ALGOIN
Rev 1.7 Page 49
VELsens
*
off - on When set to
'on'
the sample level will
correspond to the value transmitted from
the MIDI device.
MIDI CH
*
omni - ch 1 - ch 16 Sets
the MIDI channel on which the samples
receives the MIDI commands. It must
match the transmitting MIDI device. In
'omni'
-mode the samples will
*
Not possible if you are running the STANDARD sampler - the parameters are adjustable but do not affect the
signal. Simply install SIMM memory and all parameters will be available.
To Next Page
Loading...
