ALGORITHMS
M5DYN
Rev 1.1 Page 13
MH-XOVR 20 Hz - flat Sets the crossover frequency for the
x HIGH decay time multiplier in 1/3-
octave steps.
SHAPE HALL, FAN, PRISM, H.SHOE Room/Hall simulation/approximation.
CLUB, SMALL With this control the initial pattern of the
reverb is chosen. In REVCORE-1, 4
distinctively different room shapes are
available (See REVERB 1/2 for further
information).
x SIZE 0.040 - 4.000 Scales the dimensions of the simulated
space depending on the SHAPE chosen.
The specific room that is being simulated
is scaled 1:1 at SIZE =1.00. This can
then be scaled up or down. Provided that
the predelay setting is relatively short,
the corresponding volume of the
simulated space is changed radically
with this control (See REVERB 1/2 for
further information).
PREDLY 0.0 - 200.0 mS or Sets the time that passes before the first
0.0 - 520.0 mS
2
reflection appear. Maximum predelay
depends on SHAPE (see table 1).
Increasing the predelay will change the
apparent position and, to some degree,
the size of the room.
2
Only if idx RAM mounted is 64K. If idx=32K max predelay will be 200.0 mS. Check your index ram in the
CONFIG menu under UTILITY.
To Next Page
Loading...
