TCM FD35C9 - Page 190

3-76
(1)
(2)
(3)
Fig. 3.244
Fig. 3.247
Fig. 3.246
Fig. 3.245
⑤ Install the parking brake cable (1) onto the
backing plate (2) and secure with the retainer
(3).
⑥ Install the parking brake lever (1) to the
primary shoe (2), and secure with the retainer
(3) and washer (4).
⑦ Install the primary shoe (1) and secondary
shoe (2) to the backing plate (3). Install the
adjuster (4) and adjuster spring (5) between
the two shoes.
● The adjusterthreaddirection should be left
for the left-side brake and right for the right-
side brake.
● Usecautionnottoallowtheadjusterteethto
come in contact with the spring.
⑧ Install the shoe guide plate (2) to the anchor
pin (1) of the backing plate, and then install
the guide cable (3) and washer (4).