Technifor T08

105
M_T08_EN_B
Menu: Variables
 Year variable (YS)
The 󰘰rst year that is shown is the current year. 5 years can be programmed. The program then automatically
updates the numbering.
Select the required 󰘰eld. Enter the data (touch keypad).
Example:
Code entry 󰘰elds (maximum: 255 characters)
 Month variable (MS)
The 󰘰rst 7 󰘰elds are displayed. Select the required 󰘰eld. Enter the data (touch keypad). To enter other
information, use the scroll bar.
Example:
Code entry 󰘰elds (maximum: 255 characters)