Technifor T08

36
M_T08_EN_B
Menu: Edit 󰘰le
1 2
1. Relative movement: displacement of x° from the current position / Absolute movement: displacement of x° from the
origin
2. Rotary device rotation direction
 Z axis (standard or optional, depending on the machine type)
Machines with Z axis function: the Z position is displayed in the top banner. This position can be expressed as
an absolute or relative value.
This function is not enabled by default.
Go to the following menu: Marking parameters - "Machine con󰘰guration" menu - Z-Axis control: automatic
Create a Z block: "Edit 󰘰le" menu - New 󰘰le - Z device
Version eZ m:
2
1
1. Absolute distance / Relative distance
2. Travel distance (mm)