Technifor T08 User Manual

53
M_T08_EN_B
Menu: Edit 󰘰le
2. "Edit" menu sub-menus
When block preparation is complete, press the arrow at the top of the screen to validate the block and go back
to the previous screen.
The program goes back to the marking 󰘰le and the sub-menus are then accessible. They are used to edit the
󰘰le in progress.
2 3 4 5 6 7
1
1. Activation / deactivation of the blocks
2. File name
3. "Copy" symbol
4. "Paste" symbol
5. "Edit" sub-menu
6. "Marking" sub-menu
7. Save the 󰘰le in progress.
 Copy/paste a block
Used to copy a block with its characteristics.
Select the block to be copied. Press the "Copy" symbol. Select the block after which the copied block is to be
pasted. Press the "Paste" symbol. The stored block is pasted after the selected block.

Technifor T08 Specifications

General

Brand	Technifor
Model	T08
Category	Controller
Language	English