Technifor T08 - X84; Character Styles; X84; Marking Management; X84; Adjustable Settings; X84; Various Functions

9
M_T08_EN_B
Introduction
 Character styles
• Marking e󰘯ects:
- normal
- inverted
- mirror
- re󰘱ected
• Alignment
• Compression / expansion
• Inclination
• Spacing between characters
 Marking management
• Standard marking:
- marking N parts
- in󰘰nite marking
• Independent marking
 Adjustable settings
• Customized speeds for marking and movement
• Force (depth)
• Date and time (CCU clock)
• Variables:
- 10 numeric, alphanumeric, alphabetic or hexadecimal counters, which can be reset each time there is a
change in year, month, day, hour, day of the week, shift
- 10 alphanumeric variables
- shift codes (Q) set according to the day of the week (up to 5 shifts per day)
- date and time based on CCU system, using the keywords:
. DD - MM - YYYY - YY - Y - hh - mm - ss - WW - CCC
. m (mark 󰘰rst digit of the minutes)
. customized formats DS (day/week), JS (day/month), MS (month) and YS (year)
• Choose a character font
 Various functions
• Download logos (LO3-PLT format)
• Transfer marking 󰘰les between PC and the machine (Backup / Restore)
• Simulate marking 󰘰le (no marking on part)
• O󰘯-limits management
• Date and time display
• Graphic preview before marking