116
M_T08_EN_B
Use
To enter other information, use the scroll bar.
The font 0 is selected by default. Keep this parameter: no action required.
Compression: enter the value 70.
The 0 inclination is selected by default. Keep this value: no action required.
The spacing 100 is selected by default. Keep this value: no action required.
By default, the text is aligned to the left. Keep this parameter: no action required.
Marking eects: select the "Mirror" eect.
The default marking direction is from left to right. Keep this parameter: no action required.
To enter other information, use the scroll bar.
Movement speed - Marking speed - Marking quality - Dot density per millimeter: keep this value: no action
required.
Creation of block # 2 is nished.
When block preparation is complete, press the arrow at the top of the screen to validate the block and go back
to the previous screen.
The program goes back to the marking le. The name of the le is displayed in the top left corner of the screen.
By default, the current le is named "New_File".
To Next Page
Loading...
Need help?
General
