Technifor T08

21
M_T08_EN_B
Z axis con󰘰guration
Examples:
• If: = -1.00 => distance between the stylus and the part = 3 - "-1" = 4 mm (0.157 in)
• If: = 0.00 => distance between the stylus and the part = 3 - "0" = 4 mm (0.157 in)
• If: = 1.00 => distance between the stylus and the part = 3 - "1" = 4 mm (0.157 in)
Note: maximum adjustment distance: 6 mm (0.236 in)
Direction of sensing: allows movement towards or away from the part to be marked.
0 corresponds to the origin when the point has been raised to its basic position.
• Button(s): Apply
Modi󰘰cations saved