Technogym DGK02U0 - Flange Bearing

Fig. 59
8.6 FLANGE BEARING
TIGHTENING TORQUE of the screws that fasten the ange bearing to the frame: apply Loctite 243
on the screw thread. Afterwards, tighten the screw with a tightening torque of 22 Nm (16.2 lbf-ft).
Fig. 60
Fig. 61
TECHNOGYM RUN Technical Service Guide
Rev. 1.0
- 109 -
TSG-00284-EN - Uncontrolled copy if printed