Technogym DGK02U0 - Moving the Product

4.8 MOVING THE PRODUCT
WARNING: Move the product very carefully, because it may become unstable and tip
over. Do not lift or move the product from the stabilisers or display.
The product has xed front wheels.
Use the two gripping points (F) for occasional and slight movement of the product.
• Bring the belt to a 2% gradient.
• Move the main switch to the “0“ position to turn o󰀨 the product.
• Lift the product slightly as illustrated, until the wheels touch the oor.
• Push forward or back.
Only use the gripping points shown.
Fig. 22
TECHNOGYM RUN Technical Service Guide
Rev. 1.0
- 48 -
TSG-00284-EN - Uncontrolled copy if printed