Technogym DGK02U0 - Electrical Connection

4.6 ELECTRICAL CONNECTION
Before connecting the product to the mains power supply, ensure that the electrical system spec-
ications comply with current regulations. Check the mains power supply specications on the
identication label.
Plug the power cable into the product socket rst and then into the wall socket.
Fig. 18
Bring the cable clamp ush with the connector, as illustrated.
Tighten the screws (W).
Fig. 19
TECHNOGYM RUN Technical Service Guide
Rev. 1.0
- 45 -
TSG-00284-EN - Uncontrolled copy if printed