The Bluetooth module makes it possible to log in the machine.
3.9.6 TOUCH SCREEN CONTROLLER
External touch screen controller not integrated in the CPU Board
3.9.7 HEADPHONES JACK BOARD
A jack is available for connecting the headphones with a microphone.
3.9.8 NFC - ANT+ - BLUETOOTH BOARD
Bluetooth Module v. 5.0 (BLE) integrated in the NFC Board.
The board makes it possible to interface with smartphones that have NFC technology.
The board contains the authentication coprocessor chip that recognizes the Apple Gymkit devices.
The board makes it possible to reads the MyWellness Band.
The board manages the signals transmitted by the ANT+ and Bluetooth heart rate monitors.
The FW of the board is upgradable.
3.9.9 USB PORT
Th USB port is used for FW / SW upgrades and recovery procedures.
3.9.10 BACK-UP BATTERY
There is a back-up battery on the CPU Board that is used to keep the internal clock powered when
the equipment is o.
3.10 SPEAKERS
The equipment is equipped with left and right speakers. The volume level is adjustable from a touch
button on the display.
TECHNOGYM RUN Technical Service Guide
Rev. 1.0
- 38 -
TSG-00284-EN- Uncontrolled copy if printed TSG-00284-EN- Uncontrolled copy if printed
To Next Page
Loading...
