Technogym DGK02U0 - Planned Maintenance

9. PLANNED MAINTENANCE
To keep the equipment perfectly e󰀩cient, planned maintenance work must be periodically per-
formed to prevent possible problems.
The operations can be divided according to the type of work and to the sta󰀨 who must do it:
ROUTINE maintenance to be performed
during preventive maintenance operations.
MAJOR maintenance
The ROUTINE maintenance operations: can
be performed by the owner of the equipment
and do not require any particular technical
expertise; they are simple operations carried
out according to good hygiene practices.
ROUTINE maintenance operations must also
be carried out by Technogym technicians dur-
ing planned maintenance visits.
Refer to the User Manual.
The MAJOR maintenance operations: must
only be carried out by a Qualied Technician
specially trained by Technogym on the
specic equipment; authorised to carry out
ne tuning of the equipment, maintenance and
repair work, checking of operation and wear of
the mechanical parts in order to ensure per-
fect and safe operation of the equipment.
Refer to the preventative maintenance
checklist, available on Technogym Direct.
ROUTINE MAINTENANCE:
No technical specialisation required.
MAJOR MAINTENANCE
Carried out ONLY by qualied Technicians,
authorised by Technogym and in accord-
ance with the maintenance foreseen in the
planned maintenance agreement.
Tab. 22
TECHNOGYM RUN Technical Service Guide
Rev. 1.0
- 111 -TSG-00284-EN - Uncontrolled copy if printed