SPEED DRIVE
Output
Frequency [Hz]
Notes
5 Km/h The value is under testing; it’ll be ready
as soon as possible.
If the test is carried out without an-
yone walking/running on the tread
belt, the precision is around 1%.
If the test is carried out with a per-
son walking/running on the tread
belt, the precision is around 5%,
due to greater uctuation.
10 Km/h The value is under testing; it’ll be ready
as soon as possible.
Tab. 21
[5]: Check the resistance between the 3 phases of the belt motor:
PIN 1 - PIN 2 ~ 1.3 Ω (including the impedance of the tester):
Fig. 48
TECHNOGYM RUN Technical Service Guide
Rev. 1.0
- 90 - TSG-00284-EN- Uncontrolled copy if printed
To Next Page
Loading...
