Section 7—2230 Service
OPTIONS
INTRODUCTION
This part contains a general description of instrument options available at the time of publication of this manual. Addi
tional information about instrument options and option availability can be obtained either by consulting the current Tektronix
Product Catalog or by contacting your local Tektronix Field Office or representative.
POWER CORD OPTIONS
Instruments are shipped with the detachable power-cord configuration ordered by the customer. Descriptive information
about the international power-cord options is provided in “Preparation for Use” in Section 2. The following list identifies the
Tektronix part numbers for the available power cords.
Standard (United States) 161-0104-00
Option A3 (Australian) 161-0104-05
Option A1 (Universal Euro)
161-0104-06
Option A4 (North American)
161-0104-08
Option A2 (United Kingdom) 161-0104-07 Option A5 (Switzerland)
161-0167-00
OPTION 33
Option 33, the Travel Line option, provides impact protection needed for rough industrial and service environments.
When the instrument is ordered with Option 33, the instrument comes equipped with the Accessory Pouch and the Front
Panel Cover, front and rear mounted shock absorbing rubber guards, an easy-to-use power cord wrap, and a carrying
strap. :
OPTION 10 AND OPTION 12
INTRODUCTION
Option 10 provides a communications interface and
additional memory for the instrument. The interface imple
mented conforms to the specifications contained in IEEE
Standard Digital Interface for Programmable Instrumenta
tion (ANSI/IEEE Std 488-1978), commonly referred to as
the General Purpose Interface Bus (GPIB). It also complies
with a Tektronix Standard relating to GPIB Codes, For
mats, Conventions and Features.
Option 12 provides a communications interface and
additional memory for the instrument. The interface imple
mented conforms to RS-232-C specifications. It also com
plies with a subset of the Tektronix Codes, Formats, Con
ventions and Features standard.
7-1
To Next Page
Loading...
Need help?
General
