Tektronix DPO7000 Series Programmer's Manual

Commands Listed in Alphabetical Order
This query-onl
y command can be issued while diagnostics are still in progress.
Group
Diagnostics
Syntax
DIAg:LOOPS?
Examples
DIAG:LOOPS? might return :DIA G:LOOPS 5 indicating that the selected set of
diagnostics was completed fi ve times during the last diagnostic execution.
DIAg:NAMe? (Query Only)
This query-only command returns the names of the subsystem, area, a nd test of
the current diagnostic test. This command can be issued while diagnostics are
still in progress.
Group
Diagnostics
Syntax
DIAg:NAMe?
Related Commands
DIAg:NAMe:AREA?,
DIAg:NAMe:SUBSYS?, DIAg:NAMe:TEST?
Examples
DIAG:NAME? might return :DIAG:NAME:SUBSYS "Processor";AREA
"Memory";TEST"DRAMWalk1"
, indicating the subsystem name, area name, and
test name of the currently selected diagnostic test.
DIAg:NAMe:AREA? (Query Only)
This query-only command returns the selected area of the current diagnostic test.
There are three l evels of diagnostic test hierarchy: subsystem, area and test. This
command is equivalent to selecting Instrument Diagnostics from the Utilities
menu and then reviewing the Diagnostic Status.
This query-only command can be issued while diagnostics are still in progress.
Group
Diagnostics
Syntax
DIAg:NAMe:AREA?
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-169

Tektronix DPO7000 Series Specifications

General

Brand	Tektronix
Model	DPO7000 Series
Category	Test Equipment
Language	English