Commands Listed in Alphabetical Order
1.2000;SOURCE
CH1;:TRIGGER:A:LOGIC:SETHOL D:HOLDTIME
2.0000E-9;SETTIME 3.0000E-9;:TRIGGE R:A:LOGIC:STATE: INPUT:CH4
RISE;:TRIGGER:A:LOGIC:STAT E:WHEN
TRUE;:TRIGGER:A:PULSE:CLAS S GLITCH;SOURCE
CH1;GLITCH:WIDTH 2.0000E-9;TRIGIF ACCEPT;POLARITY
POSITIVE;:TRIGGER:A:PULSE: WINDOW:TYPE INSIDE;WHEN
OCCURS;WID
TH 2.0000 E-9;LOGIC:INPUT: CH1 HIGH;CH2 HIGH;CH3
HIGH;CH4 HIGH;:TRIGGER:A:PULSE:WINDOW:LOG IC:THRESHOLD:CH1
1.2000;CH2 1.2000;CH3 1.2000;CH4
1.2000;:TRIGGER:A:PULSE:WI NDOW:THRESHOLD:HIGH 1.200 0;LOW
800.0000E-3;:TRIGGER:A:PUL SE:RUNT:LOGIC:THRESHOLD:CH1
1.2000;CH2 1.2000;CH3 1.2000;CH4
1.2000;:
TRIGGER:A:PULSE:RUNT:POLARI TY
POSITIVE;THRESHOLD:HIGH 1.2000;LOW
800.0000E-3;:TRIGGER:A:PUL SE:RUNT:WHEN OCCURS;WIDTH
2.0000E-9;:TRIGGER:A:PULSE :TRANSITION:DELTATIME
2.0000E-9;POLARITY POSITIVE;THRESHO LD:HIGH 1.2000;LOW
800.0000E-3;:TRIGGER:A:PUL SE:TRANSITION:WHEN
FASTE
RTHAN;:TRIGGER:A:PULSE:WIDT H:LOWLIMIT
2.0000E-9;HIGHLIMIT 2.0000E-9;WHEN WITHIN;POLARITY
POSITIVE;:TRIGGER:A:PULSE: TIMEOUT:POLARITY
STAYSHIGH;TIME 2.0000E-9;:TRIGGER:A :VIDEO:CUSTOM:FO RMAT
INTERLACED;SCAN RATE1;:TRIGGER:A:VI DEO:FIELD
ALLFIELDS;HOLDOFF:FIELD 0.0000;:TRIGGER:A :VIDEO:LINE
1;P
OLARITY NORMAL;SCAN RA TE1;SOURCE CH1;STANDARD
NTSC;:TRIGGER:A:COMMUNICAT ION:STANDARD CUSTOM;CODE
NRZ;BITRATE 1544000;AMI:PULSEFORM PLUSONE;THRESHOLD:HIGH
0.0000;LOW 0.0000;:TRIGGER:A:COMMUNICATIO N:CLOCK:POLARITY
RISE;:TRIGGER:A:COMMUNICAT ION:CMI:PULSEFORM
PLUSONE;:TRIGGER:A:COMMUNI CATION:SOURCE CH1;SOURCE:TYPE
D
ATA;:TRIGGER:B:STATE 0;TYPE EDGE;LEVEL 0.00 00;BY
EVENTS;EDGE:SOURCE CH1;SLOPE RISE;COUPLING
DC;:TRIGGER:B:TIME 16.0000E-9;EVENT S:COUNT 2
.
TRIGger:{A|B}:EDGE? (Query Only)
This query-only command returns the trigger source, coupling, and s lope for the
specified edge trigger. This command is equivalent to selecting Edge Setup from
the Trig menu and viewing the current setups, or selecting B Event
(Delayed)
Trigger Setup from the Trig menu and viewing the current Source, Slope, and
Coupling settings.
Group
Trigger
Syntax
TRIGger:{A|B}:EDGE?
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-497
To Next Page
Loading...
Need help?
General
