Commands Listed in Alphabetical Order
Related Commands
SAVe:MASK
Arguments
<QString> is a quoted string that defines the file name and path from where the
mask will be recalled. Input the file path using the form <drive>/<dir>/<filename>.
<drive> and one or more <dir>s a re optional. If you do not specify them, the
instrument will read the mask from the default directory. <filename> stands for a
filename of up to 128 characters (use of wildcard characters in filenames is not
supported). Filename extensions are not required but are highly recommended.
The file is stored in ASCII format and is user-editable.
Examples
RECALL:MASK "TEST" recalls the mask stored in the file named TEST as the
User mask.
RECAll:SETUp (No Query Form)
This command (no query form) returns stored or factory settings to the instrument
from a copy of the settings stored in memory. If factory is referenced (by
specifying ‘0’), the factory default values will be restored. This command is
equivalent to *RCL and performs the same function as s electing Recall from the
File menu, and then choosing the Setup button.
Group
Save and Recall
Syntax
RECAll:SETUp {FACtory|<NR1>|<file path>}
Related Commands
FACtory, *RCL, *RST, *SAV, SAVe:SETUp
Arguments
FACtory restores the factory setup.
<NR1> specifies a setup storage loca tion to restore. Setup storage location value s
range from 0 through 10; using an out of range value causes an e rror (222, “Data
out of range”).
<file p ath> specifies a location for an instrume nt setup file. <file path> is a
quoted string that defines the file name and path. Input the file path using the form
<drive>:<dir>/<filename>.<drive> and one or more <dir>s are optional. If you
do not specify them, the instrument will read the file from the default directory
(C:\TekScope\setups). <filename> stands for a filename of up to 128 characters
(use of wildcard characters in filenames is not supported). Filename extensions
are not required, but highly recommended.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-415
To Next Page
Loading...
Need help?
General
