Commands Listed in Alphabetical Order
Syntax
TRIGger:{A|B}
:PULse:TRANsition:THReshold?
Related Commands
TRIGger:{A|B}:PULse:TRANsition:DELTATime, TRIGger:{A|B}:PULse:
TRANsition:POLarity
Examples
TRIGGER:A:PULSE:TRANSITION :THRESHOLD? might return
:TRIGGER:A:PULSE:TRANSITIO N:THRESHOLD:HIGH 1.2000;L OW
800.0000E-3
, indicating that the upper threshold limit to 1.2 V and lower
threshold limit for the transition time trigger to 0.8 V.
TRIGger:{A|B}:PULse:TRANsition:THReshold:BOTh (No Query Form)
This command (no query form) sets the upper and lower thresholds for the
transition trigger. This command is equivalent to selecting Transition Setup from
the Trig menu and setting the desired Upper Level and Lower Level vo
ltages.
Group
Trigger
Syntax
TRIGger:{A|B}:PULse:TRANsi tion:THReshold:BOTh {TTL| ECL}
Related Commands
TRIGger:{A|B}:PULse:TRANsition:THReshold:HIGH, TRIGger:{A|B}:PULse:
TRANsition:THReshold:LOW
Arguments
TTL sets the upper and lower threshold to the nominal TTL voltage levels.
ECL sets the upper and the lower threshold to the nominal ECL voltage levels.
Examples
TRIGGER:A:PULSE:TRANSITION :THRESHOLD:BOTH TTL sets the thresholds
of the transition trigger to the nominal TTL voltage levels.
TRIGger:{A|B}:PULse:TRANsition:THReshold:HIGH
This command sets or queries the upper (most positive) transition trigger
threshold. This command is equivalent to selecting Transition Setup from the Trig
menu and then setting the desired Upper Level voltage.
Group
Trigger
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-539
To Next Page
Loading...
Need help?
General
