Commands Listed in Alphabetical Order
MEASUrement:
STATIstics:COUNt (N o Query Form)
This command (no query form) clears existing measurement statistics from
memory. This command is equivalent to selecting Measurement Setup from the
Measure menu
, selecting Statistics, and clicking the Reset button.
Group
Measurement
Syntax
MEASUrement:STATIstics:COU Nt {RESET}
Related Commands
MEASUrement:STATIstics:MODe
Arguments
RESET clears existing measurement statistics from memory.
Examples
MEASUREMENT:STATISTICS:COU NT RESET resets the count of the statistics
measurement to zero, clears the measurement statistics from memory, and restarts
the calculation.
MEASUrement:STATIstics:MODe
This command controls the operation and display of measurement statistics. This
command is equivalent to selecting Measurement Setup from the Measure menu,
clicking the Statistics button and then choosing the desired Measurement Format.
Group
Measurement
Syntax
MEASUrement:STATIstics:MOD e
{OFF|ALL|VALUEMean|MINMax| MEANSTDdev}
MEASUrement:STATIstics:MOD e?
Related Commands
MEASUrement:STATIstics:WEIghting
Arguments
OFF turns off all measurements. This is the default value.
ALL turns on statistics and displays all statistics for each measurement.
VALUEMean turns on statistics and displays th e value and the mean (µ) of each
measurement.
MINMax turns on statistics and displays the min and max of each measurement.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-409
To Next Page
Loading...
Need help?
General
