Tektronix DPO7000 Series Programmer's Manual

Commands Listed in Alphabetical Order
HORizontal:F
ASTframe:SELECTED:CH<x>
This command se ts or queries the FastFrame sele cte d frame number on the
specified waveform.
Group
Horizontal
Syntax
HORizontal:FASTframe:SELEC TED:CH<x> <NRF>
HORizontal:FASTframe:SELEC TED:CH<x>?
Arguments
<NRF> is the selected f rame number.
Examples
HORIZONTAL:FASTFRAME:SELEC TED:CH1 5 selects frame 5 on Channel 1.
HORIZONTAL:FASTFRAME:SELEC TED:CH1? might return
:HORIZONTAL:FASTFRAME:SELE CTED:CH1 5, indicating frame 5
on Channel 1 is selected.
HORizontal:FASTframe:SELECTED:MATH<x>
This command se ts or queries the FastFrame sele cte d frame number on the
specified waveform.
Group
Horizontal
Syntax
HORizontal:FASTframe:SELEC TED:MATH<x> <NRF>
HORizontal:FASTframe:SELEC TED:MATH<x>?
Arguments
<NRF> is the selected f rame number.
Examples
HORIZONTAL:FASTFRAME:SELEC TED:MATH2 4 selectsframe4onMath2
waveform.
HORIZONTAL:FASTFRAME:SELEC TED:MATH1? might return
:HORIZONTAL:FASTFRAME:SELE CTED:MATH1 5, indicating that frame 5 on
Math 1 waveform is selected.
HORizontal:FASTframe:SELECTED:REF<x>
This command se ts or queries the FastFrame sele cte d frame number on the
specified waveform.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-245

Tektronix DPO7000 Series Specifications

General

Brand	Tektronix
Model	DPO7000 Series
Category	Test Equipment
Language	English