Commands Listed in Alphabetical Order
Examples
ALLOCATE:WAVE
FORM:REF3?
might return 5000 if a 5000 point waveform was
active in the reference 3 slot.
AUTOSet (No Query Form)
This command (no query format) sets the vertical, horizontal, and trigger controls
of the instrument to automatically acquire and display the selected waveform.
(To autoset a video waveform, the video trigger must be set to video standard,
not custom
. Video arguments require video hardware.) This is equivalent to
pressing the front panel AUTOSET button. For a detailed description of autoset
functionality, see Autoset in the index of the online h elp for your instrument.
Group
Miscellaneous
Syntax
AUTOSet {EXECute|UNDo|VIDeo|VLines|VField s}
Related Commands
DISplay:GRAticule
Arguments
EXECute autosets the displayed waveform; this is equivalent to pressing the front
panel AUTOSET button. If the display is set to a PAL, MV, or IRE graticule, this
argument forces the graticule display to full mode (frame, grid, and cross hair).
UNDo returns the instrument to the setting prior to executing an autoset.
VIDeo autosets the displayed waveform.
VLines autosets the displayed waveform.
VFields autosets the displayed waveform.
Examples
AUTOSET VFields sets the instrument to trigger on all video fields.
AUXIn:BANdwidth
This command sets or queries the selectable low-pass bandwidth limit filter of the
AUX In input. The bandwidth will change with an appropriate probe attached.
This is equivalent to selecting Bandwidth from the Vertical menu.
The query form of this command always returns the maximum bandwidth of
the AUX In input.
Group
Vertical
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-87
To Next Page
Loading...
Need help?
General
