Commands Listed in Alphabetical Order
This command, l
ike all the MASK:AUTOSET commands, affects only an a utoset
on a standard mask, not the general instrument autoset function.
Group
Mask
Syntax
MASK:AUTOSet:HPOS {ON|OFF|<NR1>}
MASK:AUTOSet:HPOS?
Arguments
ON enables the autoset:hpos function.
OFF disables the autoset:hpos function.
<NR1> = 0 disables the autoset:hpos function; any other value disables enables it.
Examples
MASK:AUTOSET:HPOS ON enables the autoset:hpos function.
MASK:AUTOSET:HPOS? might return :MASK:AUTO SET:HPOS 1, indicating that
the autoset:hpos function is enabled.
MASK:AUTOSet:HSCAle
This command controls whether the autoset algorithm will attempt to change the
horizontal scale while attempting a mask autoset.
This command, like all the MASK:AUTOSET commands, affects only an autoset
on a standard mask, not the general instrument autoset function.
Group
Mask
Syntax
MASK:AUTOSet:HSCAle {ON|OFF|<NR1>}
MASK:AUTOSet:HSCAle?
Arguments
ON enables the autoset:hscale function.
OFF disables the autoset:hscale function.
<NR1> = 0 disables the autoset:hscale function; any other value enables it.
Examples
MASK:AUTOSET:HSCALE ON enables the autoset:hscale function.
MASK:AUTOSET:HSCALE? might return :MASK:AUT OSET:HSCALE 1, indicating
that the autoset:hscale function is enabled.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-289
To Next Page
Loading...
Need help?
General
