Application Exa
mples
1. Push Measure.
2. Push Add Measurement.
Add Mea-
surement
Remove
Measure-
ment
Indicators
More
Bring
Cursors
On Screen
3. If needed, o
n the side menu, push Source
and turn multipurpose knob a to select the
channel from which you want to measure.
Turn multi
purpose knob b to s e lect the
Frequency measurement. Push OK Add
Measurement on the side menu. Repeat
this proc
ess to select the Peak-to-peak
measurement, and again push OK Add
Measurement.
4. Push Menu
Off.
MSO3000 and DPO 3000 Series Oscilloscopes User Manual 141
To Next Page
Loading...
