Application Exa
mples
6. Push Bus Displa
y on the lower menu, push
Bus and Waveforms on the side menu, and
then push ASCII on the side menu.
7. Turn the Horizontal Scale k nob to adjust the
timebase.
As you increa
se the time per division, you
will see more data appear in the Bus display.
8. Push Trigge
r Menu. Select the Bus trigger
type. Define what type of condition to trigger
on, such as the Tx Start Bit.
9. Push Search, then push Search on the
lower menu, and then select On on the side
menu.
10. Push Sea
rch Type. Use multipurpose knob
a to select Bus. Push Search For and
select the desired search, such as for the
Tx Start
Bit.
11. Push the Previous and Next Mark buttons to
navigate through the record.
12. P ush Zoom and Pan to see the areas of
intere
st and analyze the results.
162 MSO3000 and DP O3000 Series Oscilloscopes User Manual
To Next Page
Loading...
