Display Wavefor
mData
Display Wavef
orm Data
This section contains concepts and procedures for displaying the acquired waveform.
Adding and Removing a Waveform
1. To add or remove a waveform from the
display, push the corresponding channel
button or the D15-D0 button on the front
panel.
You can use the channel as a trigger
source whether or not it is displayed.
Setting
the Display Style and Persistence
1. To set th
e display style, push
Acquire.
2. Push Waveform Display.
Mode
Sample
Record
Length
10k
FastAcq
Off
Delay
On |
Off
Set Hor
iz.
Position to
10%
Wavefo
rm
Display
XY Display
On
90 MSO4000B and DPO 4000B Series Oscilloscopes User Manual
To Next Page
Loading...
