Appendix B: TPP0
500B and TPP1000 500 MHz and 1 GHz 10X Passive Probes Information
Appendix B: TP
P0500B and TPP1000 500 MHz and 1 GHz 10X
Passive Probes Information
Operating Information
The TPP0500B and TPP1000 10X Passive Probes are c ompact passive probes with 10X attenuation that are designed for
use with Tektronix MS O/DPO4000B Series oscilloscopes.
The probes have no user- or Tektronix-serviceable parts.
Connecting the Probe to the O scilloscope
Connect th
e probe as shown in the illustrations below.
Compensating the Probe with MSO/DPO4000B Oscilloscopes
For information on compensating the probe, refer to the related section earlier in this manual.
(See page 13, Compensating a TPP0500B or TPP1000 Passive Voltage Probe.)
Standard Accessories
The standard accessories included with the probe are shown below.
WARNING. To avoid electric shock when using the probe or accessories, keep fingers behind the finger guard of probe
body and accessories.
To reduce risk of shock, when using the probe on floating m easurements, ensure the reference lead accessories are fully
mated before connecting the probe to the circuit under test.
192 MSO4000B and DPO 4000B Series Oscilloscopes User Manual
To Next Page
Loading...
