Compliance Info
rmation
Australia / New Zealand Declaration of Conformity – E MC
Complies with the EMC provision of the Radiocommunications Act per the following standard, in accordance with ACMA:
CISPR 11:2003. Radiated and Conducted Emissions, Group 1, Class A, in accordance with EN 61326-1:2006 and
EN 61326-2-1:2006.
Australia / New Zealand contact.
Baker & McKenzie
Level 27, AMP
Centre
50 Bridge Street
Sydney NSW 2000, Australia
Safety Com
pliance
EC Declaration of Conformity – Low Voltage
Complianc
e w as demonstrated to the following specification as listed in the Official Journal of the European Communities:
Low Volta
ge Directive 2006/95/EC.
EN 61010-
1: 2001. Safety requirements for electrical equipment for m easurement control and laboratory use.
U.S. Nationally Recognized Testing Laboratory Listing
UL 61010-1:2004, 2
nd
Edition. Standard for electrical measuring and test equipment.
Canadian Certification
CAN/CSA-C22.2 No. 61010-1:2004. Safety requirements for electrical equipment for measurement, control, and
laboratory use. Part 1.
Addi
tional Compliances
IEC 61010-1: 2001. Safety requirements for electrical equipment for measurement, control, and laboratory use.
Equipment Type
Tes
t and measuring equipment.
Safety Class
Class 1 – grounded product.
viii MSO4000B and DPO4000B Series Oscilloscopes User Manual
To Next Page
Loading...
Need help?
General
