Tektronix MSO4000B Series User Manual

Installation
Powering off the Oscilloscope
To power off the oscilloscope and remove the power cord:
Functional Check
Perform this quick functional check to verify that your oscilloscope is operating correctly.
1. Connect the oscilloscope power cable
as described in Powering On the
Oscilloscope. (See page 11.)
2. Power on the oscilloscope.
12 MSO4000B and DPO 4000B Series Oscilloscopes User Manual

Tektronix MSO4000B Series Specifications

General

Analog Channels	2 or 4
Vertical Resolution	8 bits
Operating Temperature	0 °C to +50 °C
Digital Channels	16
Memory Depth/Record Length	20M standard on all channels
Display	10.4-inch (264 mm) LCD color display
Connectivity	Ethernet
Waveform Capture Rate	>50, 000 wfms/s
Trigger Types	Edge, Pulse Width, Logic, Setup/Hold, Rise/Fall Time, Video
Math Functions	FFT
Probe Interface	TekVPI
Power Requirements	100 to 240 V ±10%, 50/60 Hz