Tektronix TG8000 User Manual

HDVG7 HDTV Digital Video Generator module
HDVG7 module
ID TEXT submenu
Usethismenuto
edit a text overlaid on the output test signa l, and to set the
display position of the text. Use the up (▲)ordown(▼) arrow button to change
the menu items. The following figure shows the ID TEXT submenu.
Figure 3-107: HDVG7 module ID TEXT submenu
Status. Enables or disables the text overlay. Use the left (◄)orright(►) arrow
button to select between Enable and Disable, and then press the ENTER button
to confirm the selection.
X Position. Sets the horizontal position of the text. The position is set as a
per
centage of active picture width. Use the left (◄)orright(►) arrow button to
change the position. You can set the value from 0.0% to 100.0% in 1% steps.
Y Position. Sets the vertical position o f the text. The position is set as a percentage
of active picture height. Use the left (◄)orright(►) arrow button to change the
position. You can set the value from 0.0% to 100.0% in 1% steps.
3–238 TG8000 Multiformat Test Signal Generator User Manual

Tektronix TG8000 Specifications

General

Brand	Tektronix
Model	TG8000
Category	Portable Generator
Language	English