3.7 Service Menu
The service menu is programmed and used ONLY by authorized personnel
of the producer!
3.8 Communicator (Dialer) Programming
The communicator is designed to be installed in the wireless system box and has the
following basic functions:
1. Transmits messages by telephone to the central monitoring station or to a preset
telephone number.
2. Provides remote control and system programming by computer.
3. Provides the ability to listen, talk and control the system over the telephone.
To access the menu to programme the digital communicator select:
The system allows up to six telephone numbers to be recorded, by which the system can
report a specic event. Use the buttons on the keyboard to enter the digits and letters in
all menus of the communicator and press
The communicator menus are active only when the Dialer has been prop-
erly installed and connected in the main panel box.
To Next Page
Loading...
