Teletek electronics AVA - Programming of AVA P-Rex 100 te Infrared Detectors

3. Programming 23
3.1.3 Programming of AVA P-Rex Infrared Detectors
Use the buttons to select the next menu from the 2)Program Device:
This is the menu for scrolling through and programming the parameters of all available
in the system infrared detectors. Two types of actions are possible from this screen after
pressing the
ENT
button.
1. The various enrolled and recorded in the system infrared detectors can be scrolled
through with the help of the
buttons.
Example:
The rst infrared detector (PIR01) in this example has been recorded as the rst system
device (01PIR) and the second (PIR02) as the third (03PIR). The names of the devices
have been edited according to their location within the system.
2. From the screen of each device press the
ENT
button to enter its parameter program-
ming submenu. For clarity we shall use PIR01 as a device name.
2)Program Device
1)Common Prog.
2)Program Device
3)PIRs
ENT
01PIR ---#012345
PIR01
03PIR ---#123456
PIR02
PIR01
1)Sensitivity
PIR01
2)Device Group
ENT
ENT
2)Device Group
N:01
PIR01
3)Change name
1)Sensitivity
0...7:03
-
2
5
8
0
1
3
4
6
79
ENT
3)Change name
PIR01
-
2
5
8
0
1
3
4
6
79
2
5
8
0
1
3
4
6
79
-
PIR01
4)Enable/Disable
ENT
PIR01
ENABLED
enable?
disable?
PIR01
5)Remove
ENT
PIR01
remove?
ENT
are you sure?
PIR01
6)LowTemperature
ENT
6)LowTemperature
not used
not used
-4 degree Ñ
-2 degree Ñ
0 degree Ñ
+2 degree Ñ
+5 degree Ñ
+15 degree Ñ
+25 degree Ñ )
or
or