Teletek electronics AVA - Maintenance Menu

56 3. Programming
3.9 Maintenance Menu
This is the rst menu in the tree structure of the system software. It is in supplementary
to the engineer-installer, where the various system parameters can be veried.
* All active parameters in the system are marked with the “*” symbol and the
inactive - with the “-” symbol. Press the
PRG
button of the keypad to change the
parameter status of the respective submenu.
Engineer
code-7777
Engineer Menu
Engineer Menu
1)Maintenance
2
3
4
5
6
7
8
9
Engineer Menu
1)Maintenance
ENT
1)Maintenance
1)SystemTroubles
1)SystemTroubles
*ÀÑ loss
1)Maintenance
2)System Events
1)Maintenance
3)Group state
1)Maintenance
4)Devices state
ENT
ENT
ENT
2)System Events
* Alarm
G01 --- Ent/Ext
Group 01 name
01PIR ---#012345
PIR01
ENT
*ÀÑ loss
* main ÂÀÒÒ
* fuse
* module ÂÀÒÒ
* low temp.
* comm. ERR
* line fault
* RFinterference
* Alarm
* FIRE
* Tamper
* Panic
* Module lost
* Medical
* full ARM
* part ARM
G06 --- Instant
Group 06 name
02MC ---#123456
MC01
1)Maintenance
5)LOG
ENT
5)LOG
1)Display LOG
5)LOG
2)Clear LOG
1)Maintenance
6)Main BATT
ENT
6)Main ÂÀÒÒ
12,5V batt OK
not measured yet
12,5V batt OK
10,0V batt LOST
11,0V batt LOW
*
*