Addressable Fire Panel IRIS - Installation and Programming Manual 45
4.7 Testing
The addressable re panel IRIS light has an option for testing of zone functioning and the LED-indication
of the panel. To make a test, choose the “Test” button from Programming Menu - Fig. Screen 26. On the
displayed screen the user/ installer could choose which test to perform - zone or LED-indication testing - Fig.
Screen 34.
Fig. Screen 34.
After choosing the desired test by pressing the respective button, the user/installer could examine the proper
functioning of each zone and the LED-indication of the front panel. The entered information has to be con-
rmed by pressing “Apply” button.
4.8 Disable introducing
The user/installer can enable or disable the loop devices, zones and the outputs of the re panel. To introduce
enabling or disabling a function you can directly choose the respective button and make corrections, or rst
by pressing “View” button to look at the current status of the system and after that, if it is necessary, to enter
new data – Fig. Screen 35.
Fig. Screen 35.
To Next Page
Loading...
