Teleview TAV900A - CONFIG Menu; CONFIG Menu Overview

TLV-300E/TAV-900A Professional Digital TV Receiver User’s Manual
execution.
3.2 CONFIG MENU
3.2.1 CONFIG Menu Overview
There are 11 sub-menus in the CONFIG menu. Change the sub-menus using Left/Right buttons
and press ENTER button to select.
Example) MENU: CONFIG
<
IM NA
00 GC N FE
US RB>
I/
< F
>T VU L 3M E N : O
1 FN- - I .I N .R 2
Table 11 CONFIG menu architecture
CONFIG
MAIN Configure MAIN channel audio/video decoder. Entries consist
of SOURCE, VIDEO, AUDIO, CAPTION, OSD.
SUB Configure SUB channel audio/video decoder. Entries consist
of SOURCE, VIDEO, AUDIO, CAPTION, OSD.
RF-IN1 Configure primary RF input, RF-IN1. Entries consist of TUNE
CENTER FREQ, TUNE CH, FREQUENCY PLAN,
MODULATION, BER INTERVAL, and EQUALIZER.
RF-IN2 Configure secondary RF input, RF-IN2. Entries consist of
TUNE CENTER FREQ, TUNE CH, FREQUENCY PLAN,
MODULATION, BER INTERVAL, and EQUALIZER.
BNC
OUT(AES/ASI/SMPTE310M)
Select output BNC mode. Entries consist of BNC-1, BNC-2,
BNC-3 and BNC-4.
SYSTEM Configure system environment. Entries consist of LOCAL
TIME OFFSET, UPGRADE FIRMWARE and LICENSE
NUMBER.
NETWORK Ethernet configuration. Entries consist of DHCP, IP
ADDRESS, GATEWAY, NETMASK, NMS IP ADDRESS and
SNMP AGENT.
Version 2.0 29