TLV-300E/TAV-900A Professional Digital TV Receiver User’s Manual
The receiver will download firmware from PC using ftp protocol. When the upgrade is finished, the receiver
will ask to reboot it.
Never turn off the receiver during the flash ROM writing. It will destroy the firmware of
the receiver and the user cannot recover the firmware again. If this situation happens, it will be
necessary to return the receiver to the vendor to repair the flash ROM.
4.3 FIRMWARE UPGRADE WITH USB PORT(USB)
Follow this instruction if the receiver has a USB Port and firmware binary image. In this case you
could upgrade with USB.
Copy the recent version of firmware to any USB memory stick. The USB memory stick should have FAT16
or FAT32 file system.
Plug the USB memory stick to the USB port on the rear panel.
Select SAVE on CONFIG/SYSTEM/UPGRADE FIRMWARE/USB the menu.
When all of the binary file contents are transferred, wait couple more minutes to write new firmware on the
flash ROM.
When the upgrade is finished, the receiver will ask to reboot it.
Never turn off the receiver during the flash ROM writing. It will destroy the firmware of
the receiver and the user cannot recover the firmware again. If this situation happens, it will be
necessary to return the receiver to the vendor to repair the flash ROM.
The binary package of new firmware can be obtained from Teleview (
mailto:sales@teleview.com)
.
Version 2.0 55
To Next Page
Loading...
